Each vise grip style clamp has one reducing combination per model, and secures PE pipe during the electrofusion process. Sampling of combinations and standard jaw inside dimensions are listed. Note: Any 2" and smaller combination is available.
The Weak Link helps protect pipe during installation. It is designed to yield before reaching the pipe’s standard safe pull strength to protect the pipe from overload. The Weak Link P20 is designed to yield at a force of approximately 20% less than normal tensile strength of PE pipe. It is available in both yellow medium density PE pipe and black high density PE pipe.
These mechanically enhanced probes are available in either a steel rod or fiberglass version with reinforced steel tip. 52” tool length. Designed with an oversized tip to make retraction easier. Handle coated with PVC for up to 10,000 volt shock resistance.
The guards provide protection for meters, regulators, and areas prone to snow and ice build-up. The Meter & Regulator Ice Guards are available up to 20” wide. Customized guards are available.
Attach the aluminum Silver Bullet to your tracer wire and install on the end of PE tubing for a weather tight seal and direct access point. A stainless steel set screw secures either 14, 12, or 10 gauge wire and the barbed insert is filled with a corrosion resistant, water displacing gel. The Silver Bullet is designed for 1/2” CTS tubing. Note: Available individually, as noted, or in packages of 100 or 300.