This regulator lock is a simple design that allows you to use a variety of types of locks to protect access to the pressure adjustment screw. It has a sturdy, stainless steel design, and can be installed without interrupting service.
These mechanically enhanced ground rods penetrate hard soils and even frozen ground. Each rod comes with a stop plate at 11-1/2” to prevent over penetration. 25” tool length. Designed with an oversized tip to make retraction easier. Handle coated with PVC for up to 10,000 volt shock resistance.
VIDEO - View product in action!
Each vise grip style clamp clamps one pipe size, and secures PE pipe during the electrofusion process. Standard jaw inside dimension - 4" for 1/2" CTS through 1" IPS, 4-3/7" for 1-1/4" IPS, and 4-7/8" for 2" IPS.
Designed to work with dual pick point valve covers with single-handed operation. Lifter spans 3-3/4” to 12-3/4” (4” to 13” nominal lid size). 4-pound, compact design. Induction hardened alloy tongs. Powder coated finish.
VIDEO – View product in action!
The stainless steel needle valve lock works with 1/4” through 1/2” tubing sizes and accepts various locks. Added holes allow for additional lock out / tag out options.
The Weak Link helps protect pipe during installation. It is designed to yield before reaching the pipe’s standard safe pull strength to protect the pipe from overload. The Weak Link P20 is designed to yield at a force of approximately 20% less than normal tensile strength of PE pipe. It is available in both yellow medium density PE pipe and black high density PE pipe.